[Humble]

Here's my setup on the race car which may work on a street car. Oil cooler is a Perma-cool Maxicool unit, 10.5" x 14" x 3.75" including the 900 cfm fan. I'm running 1/2" lines and -8 fittings on everything. The oil cooler sits in a custom frame of aluminum angle that bolts to the body and has a brace underneath to a stud on the block. There is a thermostat inline to turn on the fan and a manual override switch in the dash. For a street car you could run a smaller one that would fit better behind the wheel.