Quote:
Originally Posted by Bruce.
Lanner,
Sorry, but any chance you can detail the rear setup? Ie how the 225 fits under the stock fenders?
So I would guess there is narrow 944 hubs on steel arms (+22mm), riding with 8 et50ish alloys (first setup)
Many thanks.
|
Bruce,
Correct. Steel arm 944 setup. The wheels were 8et70 (relatively rare winter wheel). Fit well, had to slightly trim the body mount in the fender (where single bolt attaches body to pan). I could have even got away with a 6mm spacer to avoid the trimming, as there was a little room to spare to the outside. The bump stop on the frame was trimmed slightly aswell by about 8-10mm and the forward most trailing arm to spring plate bolt is countersunk flush.
I don't think a 8et55 would fit stock fenders.
Cheers,
Lanner