Thread: 944 brakes with dropped spindles
View Single Post
  #2  
Old April 25th 2003, 08:31
Sandeep's Avatar
Sandeep Sandeep is offline
Administrator
  
Join Date: Aug 2002
Location: Brampton, Ontario, Canada
Posts: 1,795
Post
Hi,

I mocked up a set of 944 Turbo front brakes (4 piston, 298x28mm rotors) on my cb dropped spindles (disk brake) and they fit fine. You do have to make an adapter in the end to mount the caliper.

I'm sure the 944 N/A brakes will work as well as they have the same caliper spacing as the 944 Turbo calipers.

I used a stock 951 front hub (no machining) with original Porsche bearings and had some spindle sleeves machined up. Check out the 993 Biturbo brake upgrade article on the main page.

KDanie had the original idea and I just adapted the idea to fit my needs.

Hope this helps.

Sandeep
Reply With Quote