Quote:
|
Originally Posted by BOBTAIL
Oh yes you cut the 2 middle lobes out of the cam and I think you turn it ...I cant remember but you turn the 2 parts so many degrees and pin the parts together, to make a 4 cyl cam.
We did have Piper make some cams but they seemed not as good as the pinned stock cams.
|
Ok, but to pin two parts of a cut cam back together must be a very special procedure I'am sure!
Imagine you don't exactly know what you are doing and the cam halves come loose
Would love to see the two cam halves apart and the pins showing. Did you perhaps make a picture of the cam halves as well?
Thanks already for the insight in your mods!
Walter