|
I would think a grade 8 would work, remeber that 8.8 metric is a grade 5 SAE and a 10.0 is a grade 8 SAE. You will have to get it very round and smooth. I would cut it off with the ziz-wheel and then put you drill in a vice and chuck the bolt in it and use the drill as a lathe(locked at a medium speed) and round it with a file then smooth it with sandpaper.
__________________
NO_H2O
72 1302 Smack Black GL
73 Bus (2L CIS Powered)
66 Beetle, 73 Standard Beetle
72 Pinzgauer 710M
Volksport Kafer Gruppe
|