Rich
Thanks for the comments. I agree with you, the stock 19mm (Bug) master cylinder just doesn't have enough volume for the huge front calipers. I also wonder if it gives too much mechanical advantage / leverage allowing you to flex the front caliper (single pots are flexier than the 4 pot cousins), hence the spongy feel.
I think I will fit the 944 master cylinder, its front to rear ratio (having actually done the calculation now) isn't as bad as I suspected it would be.
Did you have any difficulties fitting the 944 master cylinder Rich? From memory people have said it bolts on, requires a tee piece to be used for the brake light switch, and use the remote "plugs" in place of the reservoir.
Cheers
Jeremy
__________________
1302 RAt "GermanLook"
|