Some pics when positioning the G50/01 between the forks. It seems that only some of the horizontal parts of the forks need trimming:
I decided to order an organic disk from Kennedy, G50 center, 228mm and spring centered. Flywheel will be a lightenend bus 228mm unit and for now a stock pp to do some measurements.
Plan is to mount up a dummy type 4 case to see what needs to be done to get the clutch engagement working. I hope to be able to fit an annular hydraulic throw-out bearing instead of the pull style arm that is in there now.
Anyone know what the most shallow universal hydr. annular TO bearing is on the market?