View Single Post
  #5  
Old May 3rd 2009, 09:26
Alex's Avatar
Alex Alex is offline
Registered User
 
Join Date: Aug 2002
Location: Oakville, Ontario, Canada
Posts: 1,115
I would keep the hose Pete.
Stainless will rub and scratch the inner paint of the tunnel which was flooded with POR 15 btw.

You do not really see the hose either. If you must have stainless braided hoses do it in the engine compartment with AN connectors.

Just my opinion. In the NSU I will use stainless pipe thru the tunnel. The good thing about the NSU is that it has 3 access panels from the bottom of the tunnel so I can properly secure the pipes.

Alex
Reply With Quote