Ricola had the Bentley manual, but it only covers the 915 transmission. He is looking for the factory manual that covers the G50. I can probaby find it on pelican parts, but good to know you didn't need it.
I did find a 215mm g50 spline clutch but it was a 4/6 puck that wouldn't work on the street, so I will look into the 228mm setup. I was hoping to avoid machining the starter area if possible. Was this required due to the vw flywheel/vw ring gear depth being too short? Didn't know if a hybrid or porsche flywheel would solve that issue.
Thanks!
Jarrod
|