View Single Post
  #249  
Old March 11th 2012, 14:38
owdlvr's Avatar
owdlvr owdlvr is offline
Registered User
 
Join Date: Sep 2008
Location: Canada - West Coast
Posts: 773
GKN has three part numbers that are close to the 930 dimensions. I don't have a 930 joint, so I cannot measure the bolt circle of the mounting holes, which will be your deciding factor on whether you can make them fit or not.

- All three part numbers have an ID at the mounting flange of 107mm. The 930's are 108, but my Type-1s are 94 and the GKN boots I used are 93mm. You should be fine with 107mm.
- All three part numbers have a bolt-circle of 94mm.
- All three part numbers have a bolt-hole diameter of 10.2mm

MSGN001 has an axleshaft opening in the boot of 22mm. It's listed as a 'Fast' boot and plate to suit 108mm CV joints and tripod housings.
MSGN002 has an axleshaft opening in the boot of 25mm. It's listed as a 'Fast' boot and plate to suit 108mm CV joints and tripod housings.
MSGN011 has an axleshaft opening in the boot of 22mm. It's listed as a 'Fast' boot and plate to suit 108mm CV joints and tripod housings (high angle).

I am using a 'regular' boot (not listed as high angle), but using the part numbers above I would Google and see what you can find that's available. Of course, you're in the motorsports mecca of the UK, so GKN has an office in your neck of the woods (relatively speaking). +44 121 313 1661. sales@gkndriveline.com

-Dave
__________________
'71 Type 1 - Rally Project
'58 Type 1 - I bought an early!?!
'73 Type 1 - Proper Germanlook project
'68 Type 1 - Interm German 'look' project
'75 Type 1 - Family Heirloom
'93 Chevy 3500 pickup - Cummins Swap
Reply With Quote