Wishbone suspension bolt on kit
Hi everybody,
there was this huge coil over thread on the STF and I was talking to couple of people about a wishbone setup for a B/J Standard bug. Mark Payne from PaynePrecision is interested in making a setup if there is enough interest. Attached is a rendering of the setup.
Here is the estimated cost of the setup:
ballpark price:
fabricated parts (frame & wishbones ) $550-650
shocks (coilovers) $300-skys the limit
rack and pinion $250-300
heim ends and balljoints $100
----- total $1200-up depending on shock choice
I am very interested in a setup. If you are, please let me know.
The chance is bigger for the setup being made if there are a couple of people willing to buy a setup. It will use stock balljoints and spindles. If I get more infos I will post them here.
I will talk to Mark tonight so give me some feedback. I will discuss some slight changes with him that I think will make this setup more suitable for people with painted cars. I am thinking of changing the rear frame design to accomodate the original wheel well.
Thanks,
Alex
|