if i am calculating that right, that means that each degree is 7.8mm. best guess is i need 1" on the right and 1.5" on the left (get the strange feeling i will be doing this a few times). SO, following the method above:
i need 25.4mm or 3.25 degrees on the right. that means four clicks CW on the inside and four on the outside CCW.
i need 38.1mm or 4.88 degrees on the left. that means six clicks inside and out.
does that sound right? am i even close? or am i over thinking this and i should just do a click or two on the outside?
|