|
Thanks to Pete for filming that ! I am going to update the credits on the video tonight.
I agree with Greg.
My first dyno run had the boost controller set at 20 psi ... on the street I usually reach this at about 3100 rpm in 2nd through 5th and hold it to 6500 rpm when it drops to 17 psi at 7200 rpm.
On the dyno, I hit 20 psi @ 2432 rpm according to the datalogger, and held that to 5600, where the dyno started to ground my ignition as it was seeing double the RPM that the logger was seeing.
It was weird as the car sure didn't act like that on the street.
Anyways, it was a good time and I'm looking forward to the cruise on Sept 23rd.
Sandeep
|