Changed my spring plate setup to steel as the aluminum one I had made earlier the thread pulled out...
I trimmed the sharp edges off later.
Installed a mechanical oil pressure gauge as the electric one I had was giving me nightmares. Also installed LED oil idiot light and Innovate AF gauge.
Made an oil manifold that houses idiot light/oil pressure/oil temperature senders.
Played around with some quick release steering wheel hubs that a friend borrowed to me. I really liked the colour of the red ball release one but after I installed it I found it had too much play so I will be going with the splined one which was way better.
Going to pull the gearbox next weekend and install the spool