|
Be careful, if you set both spacers on the inside,(and have red urethane buushings) the bushing will come off. Don't ask me how I know :P
I also tried both spacers on the outside, (I think this is what the manual says) and the bushing also came out a few mm's but stopped inside that "cage".
Right now I run one shim on the inside and one on the outside and it looks good.
About the toe-out problem, I don't seem to have it at all... actually the setting I run now, was done as a trial, to see how much toe-in + camber I can get, and I can say it's visible with the naked eye, so it's alot! (mostly the toe-in, not the camber).
Can this be super - non super beetle related maybe?
|