Quote:
Originally Posted by Veedub
Scat Pro Street Forged 1.25:1 rockers- 157.45 (to cheap?)
Engle W110 cam with a .430" lift and .284" duration- 64.95
Billet Steel Straight Cut cam- 73.45
Super Big Bore Kit 90.5mm p&c's forged- 199.95
4140 Forged Chromoly 69mm crank- 179.95
Pertronix Distributor Ignitor II w/ non vac- 169.95
Flamethrower II Coil - 37.95
Pertronix 8.0mm plug wires- 29.95
|
I did a little more searching (remember project will be a later side project, but like I said, dont hurt to prepare now than not know what I want later on)
well anyways I did a little more searching and found this stuff for a 1776cc or a 2007cc if you desire.Maybe this will help you also Evilangel.
instead of a Engle W110 use a 86A( aircooled.net calls it a Mild Ratio Grind cam) - 94.95
Aircooled.nets, L5 Road Warrior Heads- 750.00 plus a Venturi cut valve job- 50.00 plus Match port intakes (if you buy intakes from them) -50.00
Lowbuggets 1.4:1 forged rockers (need a 1.4 or 1.5:1 rocker with the cam posted above)- 129.99
Lowbugget has malhe forged 90.5 pistons and cylinders- 180.00
Bosch Rev limiting rotors 5800rpms- 24.99
Jbugs Dual 40IDF carb kit (maybe cheaper from somewhere else?)- 829.95
What you think this would do to the reliability issues, anything bad?
a total of 2628.08 of course thats not counting shipping, and hopefully you get more than 100hp