Thread: Spyder Bait
View Single Post
  #33  
Old April 3rd 2010, 05:49
Wally's Avatar
Wally Wally is offline
Registered User
 
Join Date: Nov 2002
Location: The Netherlands
Posts: 2,552
Quote:
Originally Posted by Humble View Post
Wally, do you know your front corner weights? How much stuff do you have up there? What rear springs/torsion bars are you running?
Not by heart, but 2 years ago it was about 42% at the front, but now with the heavier G50 tranny its probably more like 38-40%.
Total weight with cage is probably around 985-1000 kg in street/track trim with about half a tank of gas, so its about 400 kg front side or 200 kg/450lbs per front wheel side.

I have the DS oil tank up there, oil cooler, fuel pump and filter, hydraulic clutch reservoir, the battery, waterinjection tank, thicker sway bar of course, some bars in the front subframe and some to hold the DS tank in its place and a bar between spring towers welded in.
Plus the usual 4 ltr reserve tank and some spare tools.
All in all, it adds up I suppose and that was the whole idea too

In the back I now run 25.5mm torsion bars only with a Whiteline 24mm swaybar.
Reply With Quote