Mine was a little more awkward. This could have been because my car is right hand drive- so the ports for the mc sat really close to the tunnel. The car is a 71 1302- so there is less space around the mc than on standard bugs.
I couldn't have fitted the brake light switch in their if I had wanted to.
I ran 2 new front hard lines - one to each side, from each of the mc ports for the front (the 23mm portion), and allowed enough length so i could fit these with the mc loosely in place.
I ran a short rear line to a T piece which plumbed into the stock rear line. And I ran the brake light switch off the T piece. I had to clearance the brace beneath the spare wheel well to fit the rear line to the mc.
Cheers
Jeremy
__________________
1302 RAt "GermanLook"
|