Quote:
Originally Posted by Wally
Is it that difficult to find 944 n/a hubs then? I thought they just needed two (or even just one?) adapter sleeves for the bearings to fit the beetle spindles? 944 is alu too and the CB hubs can't be bought separate iirc?
|
CB hubs cannot be bought separate, but the hub/rotor is not expensive compared to, say, custom made hubs. You can buy the rotors separate. They're about $50 per side, versus the hub/rotor together for about $159 per side. Buy the set, remove the rotor and resell for $45. Cheap hubs, made for the VW spindle and in a 5x130 pcd.