Quote:
Originally Posted by evilC
I don't think this will work as the base of the windscreen is a high pressure area and therefore is used as the inlet area for heater and dash venting. I can't think of a single vehicle that doesn't use this area as an inlet for the interior that proves the effectiveness of it.
Clive
|
I know what you mean, although, I do have all of the vent's / heater stuff taken out and the holes welded up with sheet metal. I'm going to seal the car with 3M seam sealer real good. So I'm thinking the air that comes through the front louvers of the the front clip with allow air to flow through the engine compartment and through those vents. What do you think?