View Single Post
  #5  
Old October 25th 2004, 14:36
Sandeep's Avatar
Sandeep Sandeep is offline
Administrator
 
Join Date: Aug 2002
Location: Brampton, Ontario, Canada
Posts: 1,795
You are right ... Todays pressure is 101.87 KPa and Toronto is at 270m above sea level ... that works out to 210.10 F. Another boiling water test shows the temp on each of the thermocouples at 211.6 F so within about 1.5F. :agree:

I also rerouted my coil spark plug wire and it really helped eliminate most of the noise. 2nd run here.

I won't put up anymore runs until I get the RPM's and RWS sensors hooked up, so I can show the temps at what RPM and RWS.

Sandeep
Reply With Quote