View Single Post
  #15  
Old July 24th 2004, 02:46
Jeza Jeza is offline
Registered User
 
Join Date: Sep 2002
Location: Wellington, New Zealand
Posts: 108
Jonathan


Not sure what the part number is - there aren't any part number like numbers that I can see on it. But it is the "ate" item.

I'll let you know when its in with the results.

At the moment I'm planning to separate out the front lines (there is 2 front line ports in the 944 mc). I'll use a plug in one side of the front T piece and run one new front line to one side and adjust the old front line to the other side.

The rear is lengthed with a T piece to use the pressure brake light switch and a short line to the new mc port - same as every one else.

Also an update on the plastic remote reservoir fittings. I had a lot of trouble tracking these down. None of the brake shops could help. I eventually found some in an old big BMW (7 series? from 70's?) at pick a part. So if you end up stuck then try the BMW parts department.

Cheers
Jeremy
__________________
1302 RAt "GermanLook"
Reply With Quote