View Single Post
Old January 31st 2004, 13:52
craazy Cooter's Avatar
craazy Cooter craazy Cooter is offline
Registered User
Join Date: Jul 2003
Location: East Bay, California
Posts: 162
They also come with these levers on the fan shroud side of the carb body that are an enrichment circuit that you attatch a pushpull cable to, like chokes, only without the plates. The alfa guy supplies these blockoff plates but no gaskets. I made mine from some simple grey gasket paper. Easy! Also there's this little black piston thing protruding from the top of the carbs. You have to take it out and use a dremel tool to cut it flush with the top, otherwise you can't mount the linkage plates ans filter bases. As for the studs that come with the carbs, they are too long, and I used 20mm long button head hex socket bolts inside the air cleaner to hold down the plates. Hope this helps. :agree:
Attached Images
File Type: jpg carbies.JPG (64.9 KB, 11 views)
Reply With Quote