Quote:
Originally Posted by fastdub
when i had to remove the tar board from my floorpan, i found out, after trying everything else, that the only way to really get it off is to cut it/chip it off then go over the whole lot with paint stripper and slowly wipe it away
it takes ages
so dont think its a five minute job
|
Yep, that's what we did with a bug we are fixing up for a raffle. We used screw drivers and a rather dull chisel. I still have the blister on the palm of my hand 3 weeks later! Try tapping on the stuff with a dull chisel, it breaks it loose from the metal, making it easier to remove. Good luck!
Henry