View Single Post
  #8  
Old February 6th 2004, 17:56
justdubbin's Avatar
justdubbin justdubbin is offline
Registered User
 
Join Date: Aug 2003
Location: On a little island called England..
Posts: 229
seam sealer

boygenius, have you used the seam sealer yet?
If not then I have a tip to keep it looking factory,

Before you start sealing, run a peice of masking tape either side of your welds about an inch apart, apply the sealer either by brush or sealer gun, after 10 mins or so use a small paint brush soaked in thinners to smooth out the sealer making it look factory.


Rob.
Reply With Quote