The AeroQuip Express place in Forest Part is close to me and they make lines, I found the BPT fittings for the Volvo coolers there $10 ea. If anyone needs a set for a Volvo cooler I got some (cheap). The AeroQuip 18mmX1.5 to AN fittings for the RX7 cooler are steel 90 deg. and have a sealing jam nut that seals to the cooler with an "O" ring and packing/washer. They have them in -8 and -10. I just need to save up some $$ to get all the stuff. They have reusable AN hose end fittings with the thread on collar so you can make your own lines and replace the hose if you need to so you only buy the ends once. Let's see, 6 of those, 2 of the 90 deg. 18mm to -10 AN's, 4 3/8 npt to -10 AN's and hope the 1/2 inch WeatherHead hose I have will work with the hose end AN fittings.
I have driven the car twice and have the craving to spank a pimped-out Ricer or 5L Stang like a cheap Ho on Role-Play night, "SMACK"----Who's-Yo-Daddy-----"SMACK"----WHOOOOOOOO's-YO-DAAAAADDY.
Oh.....Uh......Sorry bout that.
Did I mention how hard this engine pulls and how sweet the Dells sound back there, whistling out their tune when you crack the taps open. GRRRRRRRR I want to drive it.