Thread: CLKWRK's Ghia
View Single Post
  #2  
Old May 31st 2007, 17:28
CLKWRK's Avatar
CLKWRK CLKWRK is offline
Registered User
 
Join Date: Aug 2002
Location: St. Catharines, Ontario
Posts: 382
hiya,

17" Konig rims off an accord, on 205/40/17 falken tires all around, the offset is 40mm
Up front:
2" CB drop spindles with adjusters (that are set to max so they arent really used) ,bilstein yellow shocks, whiteline 22mm sway bar, stock brakes with redrilled rotor 100x4, stock torsion bars and stock width. I had a 2" narrower beam in before but the wheels diddnt fill the wheel well as nicely and tended to rub when turning full right or left.

Back:
bilstein shocks, bugpack 24mm sway bar, golf 2 calipers, empi redrilled rotors 100x4 with 3/8" machined off the face to tuck the wheels in, stock torsion bars.

this combo works for me and handles quite well even with the weight of the turbo hanging out the back.

One thing to note, I have raised the car up about an inch since those pics were taken, it handles much nicer and still looks good

Bry
__________________
GL ghia restoration:
http://s473.photobucket.com/albums/r...20restoration/
__________________________________________

Last edited by CLKWRK; May 31st 2007 at 17:35.
Reply With Quote