Ok, so I have been thinking about the explanation and things.... It was mentioned that when the bars are installed, there should be a SLIGHT 'preload' on them. Now exactly how/what order should the preload be applied?
Here is my take on it, but correct me if I am wrong:
The two diagonal bars should be installed with a 'negative' preload. Thus pulling the top of the shock mounts closer to the frame horns. Because of the framehorns flexing downwards when you excelerate hard, you want the 'free play' to be as little as possible by 'pulling them up' slightly. Then the top bar should be installed with a slight 'positive' preload. Meaning pushing the top shock mounts outwards. This way the top bar will cancel out the 'pulling inwards' force that the diagonal bars are causing, and tie the whole lot in nice and tight.
This is my version of a shot in the dark
