|
lowered by dropping it 5 inner splines and then raising it 5 outer splines.. (approx 30mm drop) toe-is set as close to zero as i could get it.. Z-bar is removed, springplate lower stops are built up with weld then ground down to shape.. this has created an effect similar to flopstops or limiting straps... if you jack the rear end up, the wheels only drop around 2 or 3 inches before the springplates hit the stops.. ie: no horrible wheeltuck!! shocks are bugpack blues.. i tried stiffer shocks, but they dont lend themselves well to swingaxle rears IMO.. creates too much oversteer. soft is good when combined with a stiff front.
hope that helps some?! any more Q's feel free to shout...
|