[Xellex]

thanks! Let me show you what I've been upto since the last update:
I revised all the wiring in the engine bay. Took out alot of not needed wiring. Mounted the voltage regulator where it's supposed to be. I made a small relay and fuse panel to have everything more organised.


I converted it to coil-on-plug using the method I have read about on Slowtwitch's topic on shoptalkforums.


I made a small vacuum collector for the MAP sensor:




I installed the crankcase ventilation system.


And after about a month, I started the engine again. Now it runs on COP wasted-spark. A small video:
http://www.youtube.com/watch?v=ARQdv55OuA8