Thread: Driveshafs
View Single Post
  #2  
Old January 23rd 2008, 17:20
trevorbrady's Avatar
trevorbrady trevorbrady is offline
Registered User
 
Join Date: Jul 2002
Location: Kilkenny, Ireland
Posts: 144
presuming your 915 has coarse splinesin the ouputs, you can use 901 output flanges and VW type1 CVs on the inner end of the drive shaft or use 930 sized output flanges and 930 sized CVs on the inner end of the drive shaft. The other option (which I used) was to redrill the 930 sized output flanges for 944/type4/VW bus sized CVs and use the CVs that came with the driveshafts.
The drive shafts you need are the shafts that come from the same year/spec car as the trailing arms came from.
Reply With Quote