|
hi
no way should that engine run on anything smaller than a 135 main on the 125 you are too lean get it out!
go to aircooled net read the excellent diatribe for weber carbs set your floats as instructed by it do not not do it this is criticle to set spot on as per johns write up.
then re sync the carbs print it out do not step past any part be methodical if for some point you get stressed then walk away leave it while you have a brew or someething .
have a notebook and take notes make sure you write down what you fit to the carb test drive take notes these may help later take your time and enjoy your hobby.
__________________
neil verdon 66 sqr on irs.
|