[BerT3]

Hello,

Didn't know where to post this as it's not GL related.

Put some photos online at the bottom of the progress page of my website.

Still have to tacle some problems.

Am milling the torsionbars to make the arms free-rotating. They are very though. Already destroyed a reamer.

Finally decided on some front tires as the 165/15 (80 tall !) didn't clear the fender at full lock/little drop.
I will get some Klebers 145/15 tires tomorrow.

I want to achieve pan to the ground at full drop. This will require cutting the bumpstops.

The main photo shows the installed anti-bump steer kit and the finished bottom bracket. The shock will be at that angle to clear everything at full lock/drop/lift

I will update if enough interest.

Van der Jeught Bert,
BELGIUM