View Single Post
  #43  
Old February 5th 2010, 14:52
owdlvr's Avatar
owdlvr owdlvr is offline
Administrator
 
Join Date: Sep 2008
Location: Canada - West Coast
Posts: 851


In my rally car we braced the harness bar to the tunnel, but in my next cage the harness bar will likely go into the main hoop. I've had the opportunity to "test" the belts, and they do stretch significantly :P. Due to the length increase, I'm likely to shorten the mounting points on my next car.

Quote:
Your absolutely correct!
I noticed this too and have decided to weld-in those two pieces myself lateron
The heigo cage fits so extremely well and close to the door pillars, that I will probably also just weld A- and B-pillar to the main hoops just for rigidity reasons.
I'm definitley torn on this whole thing. It's a pain to ship to Canada, but based on your photos it _does_ fit really well to the B-Pillars. I'd be looking at doing just the roll bar and want to keep it a bolt-in feature. So I need to make some choices on whether it's easier just to have the rally shop do the bug, or order a bolt-in.

-Dave
__________________
'71 Type 1 - Rally Project
'58 Type 1 - I bought an early!?!
'73 Type 1 - Proper Germanlook project
'68 Type 1 - Interm German 'look' project
'75 Type 1 - Family Heirloom
'93 Chevy 3500 pickup - Cummins Swap
Reply With Quote