Rip,
I've attached some pics of the 3rd gen Rx7 brake hose bracket. These install under the caliper mounting bolt. Check your local dealer (or junker), these might be the ticket for what you're trying to do.
As for the hoses, you have the plumbing right. The supers have a short metal line at the wheel side. The threads are all the same for all aircooled dubs (M10x1 Bubble flare) just different ends. Hope this helps:
Application Size(mm) Ends
BJ front (68+) 380 M/F
LP front (50-64) 480 M/F
SB front (71-73) about 290ish F/F
SB front (74-79) 330 F/F
T2 Bus front(71-79) 340 F/F
Lanner
|