View Single Post
  #17  
Old November 19th 2008, 13:02
experimentalbug experimentalbug is offline
Registered User
 
Join Date: Jun 2003
Location: Stuttgart, Germany
Posts: 3
Hi,
a lot of time passed since the last update. Unfortunately I do not have the time I wish to spend, but the progress going on slowly

The Engine grew up a little bit
I changed to the MS230 Cylinder Heads from JP-Motorsport. The bore is now 101.6mm. The Turbocharger is a Garrett GT4294R.
In front of the Engine you can see a tooth-belt drive System for the 3-Stage Dry-Sump OilPump and the mechanical Fuel Pump from Aeromotive which should have a high enough flow rate to feed the Engine with E85



Also I redesigned the Rear-Axle and changed the Rims. Now there are 11x18 285/30 at the rear and 8.5x18 with 225/35 at the front. The heavy GFK Fenders and Hoods are replaced by lightweighted CFK Parts from Remmele:





Sorry I do not have more details at this time. More to be posted later

Chris

Last edited by experimentalbug; November 19th 2008 at 13:08.
Reply With Quote