|
Adjusting a shift fork is done in the build up case (holes are cut in the case to get to the guts). I would see if Rancho can do this for you.
This time to clean your idle jet/passage, pull the jet and the mix adjustment screw, then shoot some carb cleaner thru the passage and blow it out with compressed air. Maybe have a look in the bowls to make sure you don't have any trash in there.
__________________
NO_H2O
72 1302 Smack Black GL
73 Bus (2L CIS Powered)
66 Beetle, 73 Standard Beetle
72 Pinzgauer 710M
Volksport Kafer Gruppe
|