Your impressions would be correct. You'll need to go back to see how much of the front bulkhead I had to cut out to make these fit. The pedal set I really wanted to use (Tilton's 600-series, master under foot), won't fit without cutting away significant portions of the heater channel on both pan and body.
This old(er) set of Tilton pedals are less rigid than the current generation, but ever-so-slightly narrower, which allowed me to make it work. Keep in mind that I also cut them into two pieces and narrowed the distance between brake and clutch to make it work. The washers underneath are D-shaped, not round, and You install one pair of bolts, and they hold the nuts for the second set of bolts. Have to use Allen heads, they are that close.
Lots of work, but I got 'er in there!
-Dave
__________________
'71 Type 1 - Rally Project
'58 Type 1 - I bought an early!?!
'73 Type 1 - Proper Germanlook project
'68 Type 1 - Interm German 'look' project
'75 Type 1 - Family Heirloom
'93 Chevy 3500 pickup - Cummins Swap
|