#1
|
|||
|
|||
17x7 wheels off my 1302
My car's gonna be in storage for a couple years, so I figure I should get rid on all the commodity items before they loose all their value, so:
*4 - 17"x 7"Tenzo ZT-6 wheels. Gunmetal finish. Dual bolt pattern, 4-100mm and 4-4.5" *Very good condition, some curb rash on front wheels. *+42mm offset *2 bare rims, 2 with well worn (camber wear) 215/40 Yokoham Avid H4's. *With center caps and hubcentric rings (56.1mm) *C$700 /set (add T1 used front disks in 4-100mm patten for additional C$100) *Matching rear brake kit (with e-brake) for additional $C400. Used only about 3k kms See pics at: http://www.thesamba.com/vw/classifie....php?id=133328 |
#2
|
|||
|
|||
Alright,
$C750 for the wheels as described and the front rotors. Also, complimentary machining of your rear rotors/drums to the 4-100mm bolt pattern. More info on the disks: They are stock disks machined and studded(M12x1.5) for 4-100mm bolt pattern. They measure at 0.370" thick (New=0.374, Wear limit=0.315), so they are in very good condition. They are crossdrilled. Any takers? Lanner Last edited by flat; December 29th 2004 at 14:55. |
#3
|
|||
|
|||
I got rid of the brakes, but I still have the rims.
2 with 215/40 (heavy camber wear) and 2 bare wheels. $C675. I can mount 2 very new 205/50's for an additional $C80 on the rear wheels. Free machining of your brakes to match (studs extra). Motivated seller....... Lanner |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|