|
|
#1
December 1st 2005, 00:08
|
||||
|
||||
944 Rear brake install Q's
Hello everybody!
I figured out that I want to install the 944T front brakes on the rear with 944T rotors as well. Looking on Lanner's website i found out that you can bolt the calipers directly to the early 944 (non turbo) rear backing plate, which bolts up directly to the T1's trailing arm. What else do I need  ? I know I will need a hub to attach the rotor onto, but does that mean that I will need to change the stub axel and cv joints too?Thanks for the replies in advance Clint 
__________________
Coming Soon! 86mm X 90.5mm German Look Bad *** VW Hopefully Soon!!  Back home in Port Orchard, and saving for the Bug 
|
|
#2
December 1st 2005, 04:54
|
||||
|
||||
|
I think you will need a 28mm rotor for a front turbo caliper, not sure if rear discs exist on any model 28mm thick. I think the closest you will get is a 930 rear disc which is 30mm. Someone correct me if I'm wrong! I definitely wouldn't use a thinner than stock disc for the caliper!
Rich
__________________
http://www.ricola.co.uk
|
|
#3
December 2nd 2005, 00:03
|
||||
|
||||
I was checking on vdubcustoms.com website and in their technical section about porsche brakes it states that the stock 944T rotors were 299x24.
__________________
Coming Soon! 86mm X 90.5mm German Look Bad *** VW Hopefully Soon!! Back home in Port Orchard, and saving for the Bug Last edited by BigPhattyVW; December 2nd 2005 at 00:12.
|
|
#4
December 2nd 2005, 05:13
|
||||
|
||||
|
Quote:
__________________
http://www.ricola.co.uk
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Linear Mode
