Sandeep help please...

[SuperRSi]

Hey Sandeep,
I need you to measure from the block to your BAS exhaust so I can see if the Autocraft drysump will work without mods. Thanks in advance.

Thanks,

Randy

[yetibone]

Mine's 65mm, or about 2.5" from the opening in the case for the oil pump housing, to the no. 2 headpipe. That's with the S/S header, NOT the Kafer Cup system the used to have listed.

Hope this helps.

[Massive Type IV]

All the BAS systems vary a bit... Ask Zen!