#1
|
||||
|
||||
3d project need your photos
Hey guys I have been wanting to build a 3d model of a bug for some time now. I finaly got 3d Studio Max up and running and I am going to build a 3d model of a german look bug. This way i can try out some of the ideas i have in 3d first before i do it on my bug.
Here is what i need your help for. My bug is still in TX and i am in Indy. I have two cars a 64 bug and a 73 1303 I would like to model the 1303 first. I need some photos of your 1303 to do the project. here is a list of photos i need. Front shot from about 6 feet away taken so that yoru eye level is at the dash board. Side shot far enough back to get the front and rear of the car in the frame but not any farther back Rear shot taken about 6 feet back again about eye level same as the front shot. If you have a tripod and can set it up and take some pictures like this for me i would really appreciate it. Ok now for the hard shot. Over head looking down on the car needs to be from right over the center of the car and just high enough to get the car in the frame of the picture. and then come detail shots I need close up of fenders from front, side, top and back. As i progress on the model i may request more shots of an item so that i can model it. When the model is all done and i can then render it I will be able to do requests so if for example you want to see a diffrent set of wheels on a car from a low angle i can set up the model and render it out for you. This will aslo make for some cool shots for shirts and other items i want to make. Thanks for your help i look forward to seeing some pictuers PS if you have an early car i will take those photos too I want to build a model of them too.
__________________
Vincent W. Strader 64 Type I and 73 1303 going GL top to bottom now if i could just decide wich one. 04 Mitsubishi Lancer plans power 13b Turbo Rotary 300 hp Wheels 18" turbo twists inside Sparco blue racing seats Sparco pedels, wheel, and shifter nob Sparco Rep Andrew @ www.pilotracegear.com Good deals on Sparco stuff |
#2
|
|||
|
|||
Sorry I'd like to help you but mine is a 1302
I could hunt down a 1303 for you though and try to get some good pictures? (if you throw in a pair of seat for me for freee! ) give me a week Johnny
__________________
There is no cure for our disease '69 standard ( under the knife) '72 1302 GL ( under the knife and on hold) VolkSport Kfer Gruppe www.VolkSport.net |
#3
|
||||
|
||||
sounds like fun. i doubt a chopped standard is going to help much though.
__________________
zen '73 2316 TIV GL Standard Bug (quasi) Company Branding, Graphic Design, and Web Services at DigiVinci Design |
#4
|
||||
|
||||
Mine is a 1302 also
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#5
|
||||
|
||||
My car is in too many pieces...
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM... 2004 Suzuki GSX-R 1000 crashed www.volksport.net Volksport Kfer Gruppe |
#6
|
|||
|
|||
I know where one might be around these parts I'll see if I can talk to the owner tomorrow!
John
__________________
There is no cure for our disease '69 standard ( under the knife) '72 1302 GL ( under the knife and on hold) VolkSport Kfer Gruppe www.VolkSport.net |
#7
|
||||
|
||||
good straight on shots of wheels will work too. also for you guys with the 1302 i will take pics of them as well. After i build one bug i am going to start on the others eventualy i would like to have a model of each major model change. Zen I would go for a chopped bug too.
__________________
Vincent W. Strader 64 Type I and 73 1303 going GL top to bottom now if i could just decide wich one. 04 Mitsubishi Lancer plans power 13b Turbo Rotary 300 hp Wheels 18" turbo twists inside Sparco blue racing seats Sparco pedels, wheel, and shifter nob Sparco Rep Andrew @ www.pilotracegear.com Good deals on Sparco stuff |
#8
|
||||
|
||||
There is a stock model on the internet. Because I wanted to build one to.
__________________
90 in to te corner. |
#9
|
||||
|
||||
Well i started looking up vw blueprints and found this one on a 3d site should work for the early car can you tell me what year it is? I thnk it may be a 65-67 cant tell if the windows are small enough to be a 64
__________________
Vincent W. Strader 64 Type I and 73 1303 going GL top to bottom now if i could just decide wich one. 04 Mitsubishi Lancer plans power 13b Turbo Rotary 300 hp Wheels 18" turbo twists inside Sparco blue racing seats Sparco pedels, wheel, and shifter nob Sparco Rep Andrew @ www.pilotracegear.com Good deals on Sparco stuff |
#10
|
|||
|
|||
Hi if you want good quality Beetle Blueprints, you can find some at www.blueprint69.com
|
#11
|
||||
|
||||
Quote:
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|