#1
|
|||
|
|||
Not really German look question - but 1303 wheel knowledge required
Hey all.
This isn't necessarily a G.L. question, but I'm hoping that some of you guys may have the information that I need. I'd like to fit a set of Gas burner reps (4 lug) to the wifes 1303 cab. Its got standard brakes and standard struts with lowered springs. I was thinking about fitting 165/65 s on the front and 185/65on the rear, maybe lowering a bit more all round to reduce the arch - tyre gap.Id like the tyres to sit marginally inside the edge of the fender (and clear it!). The wheels are 15/5.5/22et. My question is - would they fit under the front arches without fouling the struts? If not, could I get away with a 5mm or 10mm spacer? I've looked at the diagrams and tools to help, but I'm hoping that someone might have had some real experience with similar wheels / offsets. Thanks Monkey |
#2
|
||||
|
||||
you should be fine
thats the same size and offset of my 8-spokes. but i'm running 145-65-15's up front
__________________
|
#3
|
|||
|
|||
Great thanks.
Its got 8 spoke copies on it currently, although I'm not sure of their offset. Should be good. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|