Want to widen rear - use 944 trailing arms?

[ress]

I want to widen the rear of my 73 standard so it will either exceed or match the front wheels width. I have the cb performance roto-hub disc kit would swapping a 944 trailing arms increase my width by a couple inchs?

[boygenius]

If you use the late style arms you can bump out each side by 3 inches. My car with the late arms and 18" x 10" et65 has a track of 66".

[zen]

good way to, but you would probably have to lose the CB kit though or go through some mods to get it to work on the 944 arm. i am not familiar with the specifics of the CB kit. you would need to look closely at measurements.