|
#1
|
|||
|
|||
Can I use 924 disk on
I have 72 standard and I plan to use 924 brakes disk in front and 924 drum in the rear...
Because it changes the bolt pattern... Is this a good Idea and is it possible... Thank you ...... HELP PLEASE>>>
__________________
Oh ,but it is so true though... |
#2
|
|||
|
|||
924 Porsche same as VW 4 pattern
924 is same bolt pattern as 72 beetle
It should be a straight swap 924 is thea same bolt pattern as Volkswagen, it was designed by Porsche for VW initially. The 944 came with the porsche 5 lug pattern. I have two sets of 944 brakes NOT a straight swap. One is for sale, Check out Sale section. Good luck Wolfy |
#3
|
|||
|
|||
no the pattern is 4x108 for the 924...
the 914 is the same as the beetle... i just need to know if the disk will fit from a 924 to the beetle... thank you...... i may be wrong so any info is welcomed......
__________________
Oh ,but it is so true though... |
#4
|
|||
|
|||
There are no real benefits in the 924's 4 bolt brakes, they are so close in specs to the Beetle and the oddball 108mm bolt pattern will make wheel fitment difficult.
|
#5
|
|||
|
|||
thanx for the info...
I just thought because it was easy to get these disc and that ford focus had the same pattern that it would be easy to find after market rims... Were can I buy blank disc or some with other patterns?
__________________
Oh ,but it is so true though... |
#6
|
|||
|
|||
Drilled drums or discs, Topline Parts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|