|
#1
|
||||
|
||||
944 early hub casrrier and later 944t disc
I have a non turbo hub at the rear. I have an early thin disc on this rear. It runs a 23mm spacer.(but you can run it with out obviously)
I also have a late 87 944T rear set up which has the wider hub/disc (no spacer)-its kina built in to the later models! I want to use the thicker /late model turbo disc on the early rear hub...( or is there an equivalent/thicker disc from a later model that would go on the early hub?)
__________________
"Goliath" Big motor-Big brakes-Big wheels-Big FUN !!!! |
#2
|
||||
|
||||
I would suggest asking Lanner at www.vdubengineering.com , or ask him in his section on here. The later rears will not bolt-up to the early hubs without some mods. The e-brake shoes would be a problem, and to offset the rotor enough to line-up the e-brake shoes, you would put too much side load on the hub bearings. If your wanting to add track use the ali trailing arms.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|