|
#1
|
||||
|
||||
Down and out in 2008
Hi Guys,
Looks like I will not be able to make any 2008 dates for shows / meets with the beetle I've been meaning to replace the floor pans and heater channels as the rust has been getting worse every year. My motor build is behind schedule so I've made the decision to pull the insurance for a year and get this fixed properly. I've got the tools and will be doing the work myself, I've ordered the Bug-Me DVD's to help so hopefully I can get it right the first time. I'll try to make some shows with the Honda and show some support ... its looking like 2008 is THE YEAR to be rolling (Thanks to Lanner) as there are many VW related activities planned. Maybe we can have a meet at my place ... a "raise the body off the pan" meet ... I've got a BBQ and a patio in the back .... Would be cool to have the front yard covered in VW's ... Later Sandeep |
#2
|
||||
|
||||
Sandeep,
Sounds like a plan! Floors and channels aren't too bad if you take your time. I've done em both! if you need a hand just holler! and if you need any tools just let me know, I got 'em all! Let's get Sandeep rollin! Alex
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
#3
|
||||
|
||||
hey Sandeep that's To bad but like Alex Said it's that that hard of a Job to do the Floors and channels I have a 110 welder if ya Need and other Fab and Body Tools too. I'm Down for A BBQ and pullen a body off the pan lol
I know you Said you were Behide but have you gotten a Chance to take Some pics and Measurements for that 901 I'm ready to pull the motor and tran this Weekend coming, Soo Common guys Lets help him out Chris. |
#4
|
|||
|
|||
Too bad bro, we'll miss the yellow monster.
Fire up the grill, burn some meat and I'm there. But that theory can turn on you.... I had a BBQ/pond digging party a few years back. I have nasty clay in the backyard, and digging is a killer. Well, all the boys and girls showed up, had a good meal, a few drinks...a good time all around. BUT, the festivities monopolized the schedule, and one (yes one) guy actually grabbed a shovel..... Still was fun though BTW: Anyone need any pond goldfish? These guys are worst than bunnies... Lanner |
#5
|
||||
|
||||
Booo that sucks, i'll miss it. Was watching the compilation clip on youtube yesterday.
I'll help pull the body. My suggestion, keep the beers locked. I have a fridge in the garage. When people come by to help, they help themselves to the fridge, and we talk BS while nothing gets done. I will be installing a padlock on the fridge very soon. Lanner, I'll take some Goldfish. The pond isn't opened yet. Pete
__________________
'72 super '65 bus '52 split Last edited by petevw; April 1st 2008 at 19:41. |
#6
|
||||
|
||||
Quote:
Alex P.S. was that the vid i tossed together?
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
#7
|
||||
|
||||
Looks good Sandeep, your really commited you did all that work on your own? Will ET of finish, is by summer?
Good Job
__________________
Big Daddy/ VW EGO Lets Gooooo |
#8
|
||||
|
||||
You need a primer to bond to the POR 15 called Tie Coat primer made by POR 15. Other paints then bond to the tie coat primer.
I have a BBQ propane tank with a heater attachment, so the area around the pan stays at about 15C All work has been done by myself. Now I just have to bolt the whole thing together Summer 2010 is the goal. Sandeep |
#9
|
||||
|
||||
Nice work Sandeep, props on keeping the project going. My attention span is way too short for long-term ones like that, I need to be able to drive it!!
Remember I'm not far away from you, if you find yourself in a situation where you need an extra set of hands while working on it. Looking forward to seeing the car and getting a ride in it this summer. cheers Ed N.
__________________
67 Beetle Sedan 95 Taurus SHO 89 Mustang GT |
#10
|
||||
|
||||
Looks really good Sandeep! Cant wait to see this monster back on the road.
I am stuck at the "wait for bodyshop" stage, my goal is also summer 2010
__________________
GL ghia restoration: http://s473.photobucket.com/albums/r...20restoration/ __________________________________________ Last edited by CLKWRK; January 4th 2010 at 15:21. |
#11
|
||||
|
||||
Good stuff. You will love the Tilton pedals. I have installed a set in the Herbie X project. There are some problem ares you will have to work around but they will fit and work. I want to put a set in my car but have not had the time or funds to do it.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#12
|
||||
|
||||
Another Saturday, some more progress
And a Christmas present from Santa Sandeep |
#13
|
||||
|
||||
Sandeep, what brand are the throttle bodies? And how do the air filters get mounted on those?
Oh, and nice project going on there, I love everything about it
__________________
www.vw1303s.com |
#14
|
||||
|
||||
The TB's are tapered 50mm / 45mm extrudabody.com units that flow more than 48mm TWM's. All the information is on their website.
Sandeep |
#15
|
||||
|
||||
Looking fabulous Sandeep! I have faith it will be done this summer!
That gearbox is HUGE! Alex
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|