|
|
|
|
#1
January 18th 2004, 12:36
|
||||
|
||||
|
spacers again
Where's the best place to get them? I'd like to use the bolt-through design. I'm running 17X7 front and 17X8.5 rear. Porsche Boxter wheels. Does 3/8"-front and 1" rear sound right? Thanks.
__________________
Julian '74 Super "If you are under control you're going too slow" - Parnelli Jones 
|
|
#2
January 18th 2004, 13:44
|
||||
|
||||
|
You have the exact same wheel and spacer setup that I have. I run a 1 1/4" wider fender in the back, stock in front and everything fits fine.
3/8" spacers are just goingto be a slip-on type. I bought mine from Topline. I bought my bolt-on 1" spacers from Tweeks, which is the Real Source for Porsche parts.
__________________
Mike Serrone '08 GTI DSG :: 1980 911 SC Track Car 1972 1302 German Looker - dearly missed ///BrooklynAutoRennen
|
|
#3
January 18th 2004, 16:46
|
||||
|
||||
|
Werd. So do the rear spacers have studs already on them? And do I use the stock studs on the rear rotor? Thanks!!
__________________
Julian '74 Super "If you are under control you're going too slow" - Parnelli Jones
|
|
#4
January 18th 2004, 20:07
|
||||
|
||||
|
The spacers have studs in them and they come with supplied nuts. Use the supplied nuts to attatch to your existing studs and the bolt the wheel to the spacer as normal. Make sure everything it torqued right and you're all set!
__________________
Mike Serrone '08 GTI DSG :: 1980 911 SC Track Car 1972 1302 German Looker - dearly missed ///BrooklynAutoRennen
|
|
#5
January 18th 2004, 21:02
|
||||
|
||||
|
A bunch on ebay. Do a search on "porsche wheels". Spacers in every imaginable size.
__________________
No current VW projects 54 Chevy wagon LS2 AWD 56 Chevy Panel "Lost Cause" VKG Bastage child
|
|
#6
January 19th 2004, 16:58
|
||||
|
||||
|
Sweet! Thanks alot fellas.
__________________
Julian '74 Super "If you are under control you're going too slow" - Parnelli Jones
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
