Finaly worked on my car - Page 10

johnnyvee · #**136** July 20th 2010, 10:49

sweet

scourtaud · #**137** July 23rd 2010, 19:53

Its a very very good looking car... Nice job...

Seb

**NO_H2O** · #**138** July 26th 2010, 17:45

Video proof that it lives. Nothing too hairy as I am still tuning.
http://www.youtube.com/watch?v=WLk3daAKMNc

**NO_H2O** · #**139** July 26th 2010, 17:56

Couple more pix.

**petevw** · #**140** July 26th 2010, 17:58

Right on Dave!

Sounds like Kevin is holding the camera.

Pete

**NO_H2O** · #**141** July 26th 2010, 19:27

No. Bert (Easyrider) was helping me that day. Kevin was off at a big Jr Drag Racing event that day.

wrenchnride247 · #**142** July 26th 2010, 20:58

Nice! The exhaust sounds great.

**NO_H2O** · #**143** August 2nd 2010, 08:14

I have put a few miles on it in some pretty hot weather. I am still bumping the timing up a bit at a time. Oil temps are running 90 to 100 deg C. with outside air temps of just under 100 deg F. and I am very happy with that. CHT is a bit on the low side in the same weather, indicating from 200 to 250 on my VDO gauges (cyl 1 and cyl 3). We will see how it does with 2 deg more timing (34 deg of total advance).

johnnyvee · #**144** August 3rd 2010, 01:30

wheels looks good

**NO_H2O** · #**145** March 11th 2011, 21:09

I figured out a jack mount to put an aluminum floor jack in my car. Kevin machined the mounts and I got it all installed today.

wrenchnride247 · #**146** March 11th 2011, 22:10

Nice! Always something cool going on with "Smack Black"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)