|  | 
| 
			 
			#1  
			
			
			
			
			
		 | |||
| 
 | |||
| 
				
				BBS Sport Design 17"
			 
			
			So I've wanted these 'hard to find' wheels for years and finally landed a set     8.5" ET50 / 7" ET55 front 255/40 205/50 I think I'll end up buying new tires eventually and go with 195/45 & 245/45 | 
| 
			 
			#2  
			
			
			
			
			
		 | ||||
| 
 | ||||
| 
			
			Those are smart looking wheels -- always a favorite of mine.  Are you tweaking the tire sizes for clearance issues, or do need new rubber anyway and figure that's the best size for your application?
		 
				__________________ (2004-2008): 1971 1302 w/2056 Searching for a new project ... | 
| 
			 
			#3  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			These tires have legal tread depth - but they certainly need replacing...Right now they're 25" F/R and I'm looking at getting something a little taller in back to fill the fender, while going just a little shorter in front.  Have had D90's on for many miles with 195/50's - and like the <24" tire...I would be interested in seeing a 195/50-17 - but I know of no manufacture creating such a size.
		 | 
| 
			 
			#4  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			Have you got them under std wings/fenders Chris? I have the same set but not tried them on the car yet. What car you running? | 
| 
			 
			#5  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			Std Beetle, `69/`77 - short of narrowing the rear suspension the rear wheels wouldn't fit under stock fenders with any kind of real rubber on them...I'm running 1-1/4" CCC fenders on back...The front I have not mounted yet, my `69 already has 2.5" wider fenders/stock beam/drop spindles - with the right spacer I should have the same backspace as a stock wheel...Goal is to get the ET55 down to 20.
		 | 
| 
			 
			#6  
			
			
			
			
			
		 | ||||
| 
 | ||||
| 
			
			Hi Those wheels are hot. When you posted the sizes & ETs I put them into to a online wheel offset calculator. Using a 7 inch x 23 ET Fuchs as a base line because I know these fit under stock rear fenders/guards, the 8.5 would have 46mm less inner clearance and 8 mm more outer clearance than a 7 inch wheel, so with stock fenders they might just work. Steve 
				__________________ STI powered 1303 in the works. | 
| 
			 
			#7  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			7's are close under stock rear fenders...I've mocked up 8's and although they might have worked, wider fenders it was.  I've seen 9's under 1-1/4" fenders - and they were snug. These popped-up on CL and just had to pick them up  17x8/6.5 Boxster. Big ol' 235/50:   | 
| 
			 
			#8  
			
			
			
			
			
		 | ||||
| 
 | ||||
| 
			
			Obviously I like the BBS Sport Design line as well   The last boxster wheels are cool too: 6,5J width in 17" is not a common sight for sure! whats that centre cap? | 
| 
			 
			#9  
			
			
			
			
			
		 | |||
| 
 | |||
| 
			
			The guy I picked them up from had purchased some aftermarket wheels, and they came with these centercaps... http://www.victorequipmentwheels.com/ | 
|  | 
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| 
 | 
 |